Clippings by woodman49

 Sort by: Last Updated Post Date Post Title Forum Name 

RE: Harman Accentra Problem (Follow-Up #5)

posted by: woodman49 on 02.05.2009 at 04:39 pm in Fireplaces Forum

harman did have a problem with ignitors last year and has come up with a different ignitor. looks the same but the wires are striped. also where the wires come out of the igniter under the burn pot you have to be careful when cleaning under there to make sure the wires are down near the bottom of the base and not going up against the top of the burnpot where the heat can short them

NOTES:

<none>
clipped on: 02.07.2009 at 09:00 pm    last updated on: 02.07.2009 at 09:00 pm

RE: Harman Accentra Flame Guide issue (Follow-Up #4)

posted by: woodman49 on 02.04.2009 at 09:52 pm in Fireplaces Forum

check for a buildup of clinkers [hard deposits] in the burn pot . that can make pellets push up and move a flame guide also be sure no crust build up on the sides of the burn pot that the flame guide sits on or on the bottom of the flame guide. clinker build up can also slow down your ignition

NOTES:

<none>
clipped on: 02.07.2009 at 08:57 pm    last updated on: 02.07.2009 at 08:59 pm