 |
 |
Clippings by whitevenetino |
| Sort by: Last Updated Post Date Post Title Forum Name | |
|
RE: Problems with Igniters on Viking Range (Follow-Up #10)
posted by: chiefneil on 07.14.2006 at 11:14 am in Kitchens Forum Apart from what
brickeeye said with cleaning, you do need to make sure you have the
updated parts I mentioned. There are a couple components. There's a new
wiring and ignitor module, and there are updated electrodes (the little
white ceramic doohickeys that shoot out the sparks). Older electrodes
were matte finish, which apparently would build up crud faster than the
new polished ones. They're also tougher, as the older ones could easily
crack during installation or repair. The electrodes were updated early
this year, so make sure your repair guy isn't using old stock. The
ignitor kit was updated last year, so there may be old stock floating
around for them too.
My local repair service wasn't up to speed on all this. I called Viking and they hooked me up directly with the regional distributor who has their own repair service, and they were very familiar with the problem and fixes. NOTES: <none>
clipped on: 07.14.2006 at 08:47 pm last updated on: 07.14.2006 at 08:47 pm
|
|
My Finished Kitchen
posted by: whitevenetino on 04.08.2006 at 11:34 pm in Kitchens Forum Just posted this on the Kitchen Forum-- but I
 by whitevenetino now realize it probably belongs here. NOTES: <none>
clipped on: 06.05.2006 at 01:27 pm last updated on: 06.05.2006 at 01:27 pm
|