Clippings by mikemcg

 Sort by: Last Updated Post Date Post Title Forum Name 

Easy Propagation Methods 2

posted by: JohnVa on 12.16.2005 at 01:37 pm in Plant Propagation Forum

Inspried by Jamie's "Easy Propagation Chamber" I decided to show you my methods :)

I use wick watering and grow under lights so my process is designed to fit those factors.

First I'll start with the wicking method:

You need the following: a 6 inch pot, a covered plastic bowl, and a nylon cord.

The cord will be pulled through the bottom of the pot and through the top center whole of the bowl lid (when you start using it). This picture is just to illustrate how it all fits together once you start using it. Keep in mind the cord just hangs out the bottom while the seeds and cuttings are getting started.

To start off, the cord is put in place in the pot with about 6-8 inches hanging out the bottom. The pot is then filled half full with potting mix and the wick placed around the other side of the pot as shown. The pot is then filled with soil to near the top. When starting seeds I leave about an inch of space below the top of the pot. With cuttings it doesn't matter.

For starting seed I use a plexiglas cover over the pot until the seedlings hit it. Once they reach the cover I remove it and attach the wick and bowl under it. Here is an example of some new seeds comin gup.

This next pic is an example of some tip cuttngs of Balloon flowers I took when they got too tall under my lights.

These cuttings are 4 days old and are being grown under a plactic 100 CD cover to keep the humidity high.

This last pic is some 10 week old Balloon flower seedlings using this method. They are grossly overcrowded but at the moment I have no place to transplant them to so they will just have to survive :) The above cuttings were taken from them. I do have several buds on them already.

Note the wick in the bottom of the plastic bowl.

One lesson learned is don't put too many seeds in. :)

John

NOTES:

<none>
clipped on: 12.16.2006 at 10:34 am    last updated on: 12.16.2006 at 10:35 am