Clippings by donnie1965

 Sort by: Last Updated Post Date Post Title Forum Name 

RE: fisher & paykel washing machine (Follow-Up #1)

posted by: dadoes on 03.24.2009 at 11:32 pm in Laundry Room Forum

More information, please.

What model is the machine?

Shut off the faucets, disconnect the supply hoses from the machine and faucets. Check the debris screens that should be at the faucet-end of the hoses for clogging, clean them if needed. Reconnect the hoses to the faucets, run each one, hot and cold, at full-force into a bucket (or into the machine's tub) to confirm the water supply runs at good pressure and is clear. There are also plastic screens inside the water valve connections. They are removable, but be VERY CAREFUL to not crack/break them. If they need cleaning and you're leery about trying to pull them out, flush them carefully with a cup of water and a small brush, or maybe a turkey baster. DO NOT SQUIRT ANY WATER INTO THE CONTROL PANEL.

Reconnect the hoses to the machine, see if that helps.


clipped on: 03.25.2009 at 07:53 pm    last updated on: 03.25.2009 at 07:53 pm