Clippings by GadgetVictim

 Sort by: Last Updated Post Date Post Title Forum Name 

RE: how to get rid of cirtus leafminer (Follow-Up #27)

posted by: hoosierquilt on 09.12.2013 at 07:46 pm in Citrus Forum

Well, I buy my Spinosad from amazon.com (Green Light), and if temps allow, I will mix it with Volck or Neem oil (not this summer, though, it's been brutally hot these last weeks). I do treat my citrus systemically with Imidacloprid twice to three times a year, which I hate to do, but, we have had sightings of the ACP here in N. San Diego county about 10 miles from me, so I have no choice, sadly. When I do spray with Spinosad, I do it after the bees have gone back to the hive, and I make sure to not spray any blossoms (sometimes hard to do, but I will use a little cup to cover up the flowers). The only reason I mix the Spinosad with hort oil is to allow it to stay stuck longer, not so much for the insecticidal effects of hort oils (although right now, I am seeing some spider mite damage here and there, so I could get a little double duty if I could use it!) I try very hard to stay as close to 100% organic as I can. I eat my fruit, and I want to know exactly what I'm eating, not so thrilled about having to eat Imidacloprid. But, until the "race for a cure" can come up with something to protect my trees from HLB, I'm having to treat for ACP, now, just to save my rather hefty citrus investment.

Patty S.

NOTES:

<none>
clipped on: 07.16.2014 at 03:09 am    last updated on: 07.16.2014 at 03:09 am

RE: Bayer Advanced Fruit, Citrus & Vegetable Insect Control? (Follow-Up #17)

posted by: hoosierquilt on 06.27.2011 at 10:38 pm in Citrus Forum

Sure, yodiana. I just mix up the Spinosad per the label directions. Same with the Neem Oil. Put both into one sprayer. I then spray in the evening, which is when the little CLM moth comes out to do it's bad thing, and bees go back to their hives or homes,and making sure we're not in for a super warm day (as the Neem oil can burn the leaves). I make sure to spray the new growth, as the CLM only can mine in the newer, tender leaves. I spray very well, tops and bottoms of leaves. I also try to avoid bloom times if at all possible, as Spinosad when wet (and even dry) can be mildly toxic to bees. With lemons, of course, that's hard to do as the bloom just about all the time. I spray when I first see evidence of CLM. For us, that can be in the spring as well as the fall. I spray 3 times, in 3 week intervals. I do one spraying series in the Spring, then another round in the Fall when it can be much worse. Many of our citrus growers follow this protocol with excellent results. So far for me, no CLM this Spring.

And, if you're looking for a nice Bearrs Lime, try Clausen's Nursery, 3132 Blackwell Dr. Vista, CA 92084, (760) 724-3143. They're until 5:00 pm, and also open on Saturdays. Ray is great, and they grow large numbers of citrus for our area. Plus, their prices are unbeatable.

Patty S.

NOTES:

<none>
clipped on: 07.11.2014 at 01:02 pm    last updated on: 07.11.2014 at 01:02 pm

Fertilizer Program for Containerized Plants III

posted by: tapla on 05.06.2011 at 10:44 am in Container Gardening Forum

This subject has proven popular on the Container Gardening Forum, having reached the maximum number of posts allowed on two previous occasions, so I'll post it for its third go-round. Nutrient supplementation has been discussed frequently, but usually in piecemeal fashion on this and forum and other forums related. Prompted originally by a question about fertilizers in another thread, I decided to collect a few thoughts & present a personal overview.


Fertilizer Program - Containerized Plants III

Let me begin with a brief and hopefully not too technical explanation of how plants absorb water from the soil and how they obtain the nutrients/solutes that are dissolved in that water. Most of us remember from our biology classes that cells have membranes that are semi-permeable. That is, they allow some things to pass through the walls, like water and select elements in ionic form dissolved in the water, while excluding other materials like large organic molecules. Osmosis is a natural phenomenon that is nature's attempt at creating a balance (isotonicity) in the concentration of solutes in water inside and outside of cells. Water and ionic solutes will pass in and out of cell walls until an equilibrium is reached and the level of solutes in the water surrounding the cell is the same as the level of solutes in the cell.

This process begins when the finest roots absorb water molecule by molecule at the cellular level from colloidal surfaces and water vapor in soil gasses, along with the nutrient load dissolved in that water, and distribute water and nutrients throughout the plant. I want to keep this simple, so I'll just say that the best water absorption occurs when the level of solutes in soil water is lowest, and in the presence of good amounts of oxygen (this is where I get to plug a well-aerated and free-draining soil). Deionized (distilled) water contains no solutes, and is easiest for plants to absorb. Of course, since distilled water contains no nutrients, using it alone practically guarantees deficiencies of multiple nutrients as the plant is shorted the building materials (nutrients) it needs to manufacture food, keep its systems orderly, and keep its metabolism running smoothly.

We already learned that if the dissolved solutes in soil water are low, the plant may be well-hydrated, but starving; however, if they are too high, the plant may have a large store of nutrients in the soil but because of osmotic interference the plant may be unable to absorb the water and could die of thirst in a sea of plenty. When this condition occurs, and is severe enough (high concentrations of solutes in soil water), it causes fertilizer burn (plasmolysis), a condition seen when plasma is torn from cell walls as the water inside the cell exits to maintain solute equilibrium with the water surrounding the cell.

Our job, because we cannot depend on an adequate supply of nutrients being supplied by the organic component of a container soil as it breaks down, is to provide a solution of dissolved nutrients in a concentration high enough that the supply remains in the adequate to luxury range, yet still low enough that it remains easy for the plant to take up enough water to be well-hydrated and free of drought stress. Electrical conductivity (EC) of, and the level of TDS (total dissolved solids) in the soil solution is a reliable way to judge the adequacy of solute concentrations and the plant's ability to take up water. There are meters that measure these concentrations, and for most plants the ideal range of conductivity is from 1.5 - 3.5 mS, with some, like tomatoes, being as high as 4.5 mS. This is more technical than I wanted to be, but I added it in case someone wanted to search 'mS' or 'TDS' or 'EC'. Most of us, including me, will have to be satisfied with simply guessing at concentrations, but understanding how plants take up water and fertilizer, as well as the effects of solute concentrations in soil water is an important piece of the fertilizing puzzle.

Now, some disconcerting news - you have listened to all this talk about nutrient concentrations, but what do we supply, when, and how do we supply them? We have to decide what nutrients are appropriate to add to our supplementation program, but how? Most of us are just hobby growers and cannot do tissue analysis to determine what is lacking. We CAN be observant tough, and learn the symptoms of various nutrient deficiencies - and we CAN make some surprising generalizations.

What if I said that the nutritional needs of all plants is basically the same and that one fertilizer could suit almost all the plants we grow in containers - that by increasing/decreasing the dosage as we water, we could even manipulate plants to bloom and fruit more abundantly? It�s really quite logical, so please let me explain.

Tissue analysis of plants will nearly always show NPK %s to be very close to an average ratio of approximately 10:1.5:7. If we assign N the constant of 100, P and K will range from 13-19 and 45-70 respectively. (I'll try to remember to make a chart showing the relative ratios of all the other essential nutrients plants normally take from the soil at the end of what I write.) All we need to do is supply nutrients in approximately the same ratio as plants use them, and at concentrations sufficient to keep them in the adequate to luxury range at all times.

Remember that we can maximize water uptake by keeping the concentrations of solutes low, so a continual supply of a weak solution is best. Nutrients don't often just suddenly appear in large quantities in nature, so the low and continual dose method most closely mimics the nutritional supply Mother Nature offers. If you decide to adopt a "fertilize every time you water" approach, most liquid fertilizers can be applied at 3/4 to 1 tsp per gallon for best results. If you decide that is too much work, try halving the dose recommended & cutting the interval in half. You can work out the math for granular soluble fertilizers and apply at a similar rate.

The system is rather self regulating if fertilizer is applied in low concentrations each time you water, even with houseplants in winter. As the plant's growth slows, so does its need for both water and nutrients. Larger plants and plants that are growing robustly will need more water and nutrients, so linking nutrient supply to the water supply is a win/win situation all around.

Another advantage to supplying a continual low concentration of fertilizer is, it eliminates the tendency of plants to show symptoms of nutrient deficiencies after they have received high doses of fertilizer and then been allowed to return to a more favorable level of soil solute concentrations. Even at perfectly acceptable concentrations of nutrients in the soil, plants previously exposed to high concentrations of nutrients readily display deficiency symptoms, even at normal nutrient loads.

You will still need to guard against watering in sips, and that habit's accompanying tendency to ensure solute (salt) accumulation in soils. Remember that as salts accumulate, both water and nutrient uptake is made more difficult and finally impaired or made impossible in severe cases. Your soils should always allow you to water so that at least 10-15% of the total volume of water applied passes through the soil and out the drain hole to be discarded. This flushes the soil and carries accumulating solutes out the drain hole.

I use a liquid fertilizer with a full compliment of nutrients and micronutrients in a 3:1:2 ratio. Note that 'RATIO' is different than NPK %s. Also note how closely the 3:1:2 ratio fits the average ratio of NPK content in plant tissues, noted above (10:1.5:7). If the P looks a little high at 4, consider that in container soils, P begins to be more tightly held as pH goes from 6.5 to below 6.0, which is on the high side of most container soil's pH, so the manufacturer probably gave this some careful consideration. Also, P and K percentages shown on fertilizer packages are not the actual amount of P or K in the blend. The percentage of P on the package is the percentage of P2O5 (phosphorous pentoxide) and you need to multiply the percentage shown by .43 to get the actual amount of P in the fertilizer. Similarly, the K level percentage shown is actually the level of K2O ( potassium oxide) and must be multiplied by .83 to arrive at the actual amount of K supplied.

To answer the inevitable questions about specialty fertilizers and "special" plant nutritional requirements, let me repeat that plants need nutrients in roughly the same ratio. 'RATIO' is also an entirely a separate consideration from dosage. You�ll need to adjust the dosage to fit the plant and perhaps strike a happy medium in containers that have a diversity of material.

If nutrient availability is unbalanced - if plants are getting more than they need of certain nutrients, but less than they need of others, the nutrient they need the most will be the one that limits growth. There are 6 factors that affect plant growth, vitality and yield; they are: air, water, light, temperature, soil or media and nutrients. Liebig's Law of Limiting Factors states the most deficient factor limits plant growth, and increasing the supply of non-limiting factors will not increase plant growth. Only by increasing most deficient nutrient will the plant growth increase. There is also an optimum combination/ratio of nutrients, and increasing them, individually or in various combinations can lead to toxicities and be as limiting as deficiencies.

When individual nutrients are available in excess, it not only unnecessarily contributes to the total volume of solutes in the soil solution, which makes it more difficult for the plant to absorb water and nutrients, it can also create an antagonistic deficiency of other nutrients as toxicity levels block a plant's ability to take them up. E.g., too much Fe (iron) can cause a Mn (manganese) deficiency, with the converse also true, Too much Ca (calcium) can cause a Mg (magnesium) deficiency. Too much P (phosphorous) can cause an insoluble precipitate with Fe and make Fe unavailable. It also interferes with the uptake of several other micro-nutrients. You can see why it is advantageous to supply nutrients in as close to the same ratio in which plants use them and at levels not so high that they interfere with water uptake. I know I'm repeating myself here, but this is an important point.

What about the high-P "Bloom Booster" fertilizers you might ask? To induce more prolific flowering, a reduced N supply will have more and better effect than the high P bloom formulas. When N is reduced, it slows vegetative growth without reducing photosynthesis. Since vegetative growth is limited by a lack of N, and the photosynthetic machinery continues to turn out food, it leaves an expendable surplus for the plant to spend on flowers and fruit. Plants use about 6 times more N than P, so fertilizers that supply more P than N are wasteful and more likely to inhibit blooms (remember that too much P inhibits uptake of Fe and many micro-nutrients - it raises pH unnecessarily as well, which could also be problematic). Popular "bloom-booster" fertilizers like 10-52-10 actually supply about 32x more P than your plant could ever use (in relationship to how much N it uses) and has the potential to wreak all kinds of havoc with your plants.

In a recent conversation with the CEO of Dyna-Gro, he confirmed my long held belief that circumstances would have to be very highly unusual for it to be ever beneficial to use a fertilizer in containers that supplies as much or more P than either N or K. This means that even commonly found 1:1:1 ratios like 20-20-20 or 14-14-14 supply more P than is necessary for best results.

The fact that different species of plants grow in different types of soil where they are naturally found, does not mean that one needs more of a certain nutrient than the other. It just means that the plants have developed strategies to adapt to certain conditions, like excesses and deficiencies of particular nutrients.

Plants that "love" acid soils, e.g., have simply developed strategies to cope with those soils. Their calcium needs are still the same as any other plant and no different from the nutrient requirements of plants that thrive in alkaline soils. The problem for acid-loving plants is that they are unable to adequately limit their calcium uptake, and will absorb too much of it when available, resulting in cellular pH-values that are too high. Some acid-loving plants also have difficulties absorbing Fe, Mn, Cu, or Zn, which is more tightly held in alkaline soils, another reason why they thrive in low pH (acid) soils.

So, If you select a fertilizer that is close in ratio to the concentration of major elements in plant tissues, you are going to be in good shape. Whether the fertilizer is furnished in chemical or organic form matters not a whit to the plant. Ions are ions, but there is one major consideration. Chemical fertilizers are available for immediate uptake while organic fertilizers must be acted on by passing through the gut of micro-organisms to break them down into usable elemental form. Since microorganism populations are affected by cultural conditions like moisture/air levels in the soil, soil pH, fertility levels, temperature, etc., they tend to follow a boom/bust cycle that has an impact on the reliability and timing of delivery of nutrients supplied in organic form, in container culture. Nutrients locked in hydrocarbon chains cannot be relied upon to be available when the plant needs them. This is a particular issue with the immobile nutrients that must be present in the nutrient stream at all times for the plant to grow normally.

What is my approach? I have been very happy with Foliage-Pro 9-3-6 liquid fertilizer. It has all the essential elements in a favorable ratio, and even includes Ca and Mg, which is unusual in soluble fertilizers. Miracle-Gro granular all-purpose fertilizer in 24-8-16 or liquid 12-4-8 are both close seconds and completely soluble, though they do lack Ca and Mg, which you can supply by incorporating lime or by including gypsum and Epsom salts in your fertilizer supplementation program. Ask if you need clarification on this point.

I often incorporate a granular micro-nutrient supplement in my soils when I make them (Micromax) or use a soluble micro-nutrient blend (STEM). I would encourage you to make sure your plants are getting all the micro-nutrients. More readily available than the supplements I use is Earth Juice's 'Microblast'.

When plants are growing robustly, I try to fertilize my plants weakly (pun intended) with a half recommended dose of the concentrate at half the suggested intervals. When plants are growing slowly, I fertilize more often with very weak doses. It is important to realize your soil must drain freely and you must water so a fair amount of water drains from your container each time you water to fertilize this way. Last year, my display containers performed better than they ever have in years past & they were still all looking amazingly attractive at the beginning of Oct when I finally decided to dismantle them because of imminent cold weather. I attribute results primarily to a good soil and a healthy nutrient supplementation program.

What would I recommend to someone who asked what to use as an all-purpose fertilizer for nearly all their container plantings? If you can find it, a 3:1:2 ratio soluble liquid fertilizer (24-8-16, 12-4-8, 9-3-6 are all 3:1:2 ratio fertilizers) that contains all the minor elements would great.

How plants use nutrients - the chart I promised:

I gave Nitrogen, because it is the largest nutrient component, the value of 100. Other nutrients are listed as a weight percentage of N.
N 100
P 13-19 (16) 1/6
K 45-80 (62) 3/5
S 6-9 (8) 1/12
Mg 5-15 (10) 1/10
Ca 5-15 (10) 1/10
Fe 0.7
Mn 0.4
B(oron) 0.2
Zn 0.06
Cu 0.03
Cl 0.03
M(olybden) 0.003
To read the chart: P - plants use 13-19 parts of P or an average of about 16 parts for every 100 parts of N, or 6 times more N than P. Plants use about 45-80 parts of K or an average of about 62 parts for every 100 parts of N, or about 3/5 as much K as N, and so on.

If you're still with me - thanks for reading. It makes me feel like the effort was worth it. ;o) Let me know what you think - please.
AL

Here is a link to the second posting of A Fertilizer Program for Containers

Another link to information about Container Soils- Water Movement and Retention.

NOTES:

<none>
clipped on: 03.02.2014 at 02:15 pm    last updated on: 03.02.2014 at 02:16 pm

RE: Citrus varieties for espalier on South-facing, hot wall? (Follow-Up #43)

posted by: hoosierquilt on 08.13.2013 at 11:41 pm in Citrus Forum

I love Tom, but he would not be in the mainline of thinking with citrus. You can always check with the folks at UC Riverside for the best fertilizer formulation. In fact, if you look up fertilizer recommendations for citrus on UC Davis' Home Orchard site, all they talk about is nitrogen. Period. Tom is a great salesman. But Dave Wilson Nursery grows and sells stone fruit. Not citrus :-)

I use Gro Power Citrus & Avocado Food. It is a granular fertilizer and I apply as you have listed in your message. If you need to apply micronutrients (you'll know - your trees will start to look chlorotic if they are having issues with micronutrient uptake in late winter/early spring), you can use a foliar application of Grow More Citrus Grower's Blend, or you can apply Ironite (or both if you like - you're going to still have some lockout with a soil application while it's still a bit chilly here.) And yes, I drop Osmocote Plus in October just as an option to slowly release nutrients over the winter. Not enough to cause a flush, but hopefully enough to help stave off any chlorosis.

Container citrus that lives outside: I will apply onr or twice a month with full strength Dyna Gro Foliage Pro, and I also use Osmocote Plus every 4 to 6 months. During winter (October through about January/February), I will cut back the Foliage Pro to 1/2 strength, or stop the Foliage Pro all together if I start seeing flush. I don't want it to get nipped if we have a cold dip. But I continue with Osmocote Plus. MeyerMike was the one who suggested both of these fertilizers for his container citrus, so I just modified the application to better suit our container citrus that has the luxury of staying outside all year 'round. My container citrus trees are in great shape, btw. Thanks to Mike, I will say. I also use a modified version of the 511 mix. I use more fines, as I need to keep more water retention with my trees, as we get zero rain during our summer. So, that helps my trees from drying out. I just need to watch the soil as it may fail a little sooner than something like 511 mix. In fact, I've rescued a few in-ground citrus very successfully this way. Putting them into containers to revive them.

Patty S.

NOTES:

<none>
clipped on: 01.21.2014 at 08:38 pm    last updated on: 01.21.2014 at 08:38 pm

RE: Citrus varieties for espalier on South-facing, hot wall? (Follow-Up #42)

posted by: benbratcher on 08.13.2013 at 04:52 pm in Citrus Forum

Oh my, chock-full-of practical, So-Cal-specific (and not just limited to that of course) recommendations… LOVE your guidance Patty.

I clarified with Tom last week about the formulation and he suggested that if I did want to use the Citrus and Avocado blend for a year, go ahead, but maintained, “I still do not recommend anything but the flower and bloom. The final decision is yours.”

I’m planning to try out the Gro-Power Premium Citrus & Avocado Food 8-6-8 (http://www.gropower.com/home_garden/consumer_products.htm). Is that the one to which you’re referring? Not Gro-More, but rather, Gro-Power? (Doing internet searches generates two different fertilizers depending on the name. I’m thinking it’s the Gro-Power, same manufacturer of the Flower N Bloom, but just wanted to clarify, as I’m ready to order some from Hydro-scape Products; $37.95 for a 40 lb bag.)

It's recommended to fertilize at the time of planting?

So, if I’ve understood your regimen correctly (here and in your previous posts addressing this topic), for in-ground citrus Patty, is this what you’re saying?

Gro Power Citrus & Avocado Food, 4x/yr
- February
- April
- June
- September

Grow More Citrus Grower’s Blend
- February?
- June?

Osmocote Plus (as needed)
- October?

And how would your recommendations differ for container citrus?

NOTES:

<none>
clipped on: 01.21.2014 at 08:34 pm    last updated on: 01.21.2014 at 08:34 pm

For Jessica and anyone else that is interested 1.1.1 gritty mix.

posted by: meyermike_1micha on 02.27.2011 at 02:28 pm in Citrus Forum

I thought I would post some pictures of the ingredients that I used for the 1.1.1 gritty mix for many who have asked me in private.

I hope these pictures speak volumns with any who are interested in trying, and anyone else that has experience with it, your comments would be so welcomed here.

What have you done to in cases where you could not find these exact ingredients?
What have you substituted certain ingredients with after learning the concept of my this mix is used?
If you couldn't find turface, do you use pumice?
If you couldn't find granite, do you use perlite?
Please tell us for those who really want to come as close as they can to the 1.1.1 mix I use.

What's your 911 if need be?

I think this is needed for many I know that are getting ready to search for these products and prepare for teh growing season, especially re-potting coming up very soon!
As I have been told many times over.

"I can't wait to get my plants out of the bagged mixes I have had to watch them struggle in all winter".

Turface: MVP. This batch must be sifted...

Photobucket

Crushed Granite: Grower size

Photobucket

Photobucket

Fine "Fir Bark" in which Repti-bark in comprable: I found just a few pieces to be a bit to larger than I wanted, so I hammered the bark with a sledge hammer like crazy in a plastic bag to break it down ever further.

Photobucket

Photobucket

Screen to sift: I sifted out the dust from the bark and granite. You could also rinse teh granite off.
I also sifted teh tiny bits of turface and dust out with an insect screen and at times my Bonsai sifter.

Photobucket

Gypsum: I added a tablespoon per gallon of mix when I used any fertilizer but Foliage Pro. Now I have to need, since my Foliage Pro fertilizer has the Calcium already in it. So far so good.

Photobucket

Screen for holes on the bottoem of pots: I use needelpoint screen from Michael's to stop the mix from draining through the holes on the bottom.

Photobucket

Finished product: Last summer. I planted Chalamondin tree.

Photobucket


Photobucket

Same tree today in my room.

Photobucket

I am sure many others will add to this thread with their great ideas and wonderful thoughts.

If there is any other idea's or corrections needed, than I am sure that many whom have been growing in this mix can will share:-)

Al:::Thank you for taking the time to teach many this wonderful gidt, creation,valuable knowledge, and support shown me and many others for this wonderful mix.
I hope by now, I have it ok, since my plants are showing me I might.
With his knowledge, and the help of many others at the container forums, I would of never known!

Now my citrus can live in peace and in vibrant health yet, another year.

Mike

NOTES:

<none>
clipped on: 01.19.2014 at 08:48 pm    last updated on: 01.19.2014 at 08:49 pm

Tapla's 5-1-1 Container Mix in More Detail

posted by: goodhumusman on 02.26.2009 at 12:44 pm in Container Gardening Forum

I recently joined the forum and discovered Al's 5-1-1 Mix, but I had several questions that Al was kind enough to answer by email. I also found the answers to other questions in several different threads. I thought it would be useful to organize all of the info in one place so that we could have easy access to it. 98% of the following has been cut/pasted from Al's postings, and I apologize in advance if I have somehow misquoted him or taken his ideas out of proper context. The only significant addition from another source is the Cornell method of determining porosity, which I thought would be germane. I have used a question and answer format, using many questions from other members, and I apologize for not giving them proper credit. Thanks to all who contributed to this information. Now, here's Al:

Tapla's 5-1-1 Mix

5 parts pine bark fines
1 part sphagnum peat
1-2 parts perlite
garden lime
controlled release fertilizer (not really necessary)
a micro-nutrient source (seaweed emulsion, Earthjuice, Micro-max, STEM, etc,)

Many friends & forum folk grow in this 5-1-1 mix with very good results. I use it for all my garden display containers. It is intended for annual and vegetable crops in containers. This soil is formulated with a focus on plentiful aeration, which we know has an inverse relationship w/water retention. It takes advantage of particles, the size of which are at or just under the size that would guarantee the soil retains no perched water. (If you have not already read Al's treatise on Water in Container Soils, this would be a good time to do so.) In simple terms: Plants that expire because of drainage problems either die of thirst because the roots have rotted and can no longer take up water, or they starve/"suffocate" because there is insufficient air at the root zone to ensure normal water/nutrient uptake and root function.

I grow in highly-aerated soils with the bulk of the particles in the 1/16"-1/8" size, heavily favoring the larger particles, because we know that perched water levels decrease as particle size increases, until finally, as particle size reaches just under 1/8" the perched water table disappears entirely.

Ideal container soils will have a minimum of 60-75% total porosity. This means that when dry, in round numbers, nearly 70% of the total volume of soil is air. The term 'container capacity' is a hort term that describes the saturation level of soils after the soil is saturated and at the point where it has just stopped draining - a fully wetted soil. When soils are at container capacity, they should still have in excess of 30% air porosity. Roughly, a great soil will have about equal parts of solid particles, water, and air when the soil is fully saturated.

This is Cornell's method of determining the various types of porosity:

To ensure sufficient media porosity, it is essential to determine total porosity, aeration porosity, and water-holding porosity. Porosity can be determined through the following procedure:

* With drainage holes sealed in an empty container, fill the container and record the volume of water required to reach the top of the container. This is the container volume.

* Empty and dry the plugged container and fill it with the growing media to the top of the container.

* Irrigate the container medium slowly until it is saturated with water. Several hours may be required to reach the saturation point, which can be recognized by glistening of the medium's surface.

* Record the total volume of water necessary to reach the saturation point as the total pore volume.

* Unplug the drainage holes and allow the water to freely drain from the container media into a pan for several hours.

* Measure the volume of water in the pan after all free water has completed draining. Record this as the aeration pore volume.

* Calculate total porosity, aeration porosity, and water-holding porosity using the following equations (Landis, 1990):

* Total porosity = total pore volume / container volume
* Aeration porosity = aeration pore volume / container volume
* Water-holding porosity = total porosity - aeration porosity

The keys to why I like my 3-1-1 mix:

It's adjustable for water retention.
The ingredients are readily available to me.
It's simple - 3 basic ingredients - equal portions.
It allows nearly 100% control over the nutritional regimen.
It will not collapse - lasts longer than what is prudent between repots.
It is almost totally forgiving of over-watering while retaining good amounts of water between drinks.
It is relatively inexpensive.

Q. Why do you use pine bark fines? Bark fines of fir, hemlock or pine, are excellent as the primary component of your soils. The lignin contained in bark keeps it rigid and the rigidity provides air-holding pockets in the root zone far longer than peat or compost mixes that too quickly break down to a soup-like consistency. Conifer bark also contains suberin, a lipid sometimes referred to as nature�s preservative. Suberin, more scarce as a presence in sapwood products and hardwood bark, dramatically slows the decomposition of conifer bark-based soils. It contains highly varied hydrocarbon chains and the microorganisms that turn peat to soup have great difficulty cleaving these chains.

Q. What is the correct size of the fines? In simple terms: Plants that expire because of drainage problems either die of thirst because the roots have rotted and can no longer take up water, or they starve/"suffocate" because there is insufficient air at the root zone to insure normal water/nutrient uptake and root function.Pine bark fines are partially composted pine bark. Fines are what are used in mixes because of the small particle size. There will be a naturally occurring "perched water table" (PWT) in containers when soil particulate size is under about .125 (1/8) inch, so best would be particulates in the 1/16 - 3/16 size range with the 1/16-1/8 size range favored.

Note that there is no sand or compost in the soils I use. Sand, as most of you think of it, can improve drainage in some cases, but it reduces aeration by filling valuable macro-pores in soils. Unless sand particle size is fairly uniform and/or larger than about � BB size I leave it out of soils. Compost is too unstable for me to consider using in soils. The small amount of micro-nutrients it supplies can easily be delivered by one or more of a number of chemical or organic sources.

Q. Do you use partially composted pine bark fines? Yes - preferred over fresh fines, which are lighter in color.

Q. I found some Scotchman's Choice Organic Compost, which is made of pine bark fines averaging about 1/8" in size, and, after adding all ingredients, the 5-1-1 Mix had a total porosity of 67% and an aeration porosity of 37%. Is that all right? Yes, that is fine.

Q. What kind of lime do you use? Dolomitic.

Q. What amount of lime should I add if I used 10 gal of pine bark fines and the corresponding amount of the other ingredients? @ 5:1:1, you'll end up with about 12 gallons of soil (the whole is not equal to the sum of the parts when you're talking about soils), so I would use about 10-12 Tbsp or 2/3-3/4 cup of lime.

Q. What grade of coarseness for the lime? Most is sold as garden lime, which is usually prilled powder. Prilling makes it easier to use in drop & broadcast spreaders. The prills dissolve quickly. The finer the powder the quicker the reactive phase is finished. Much of the Ca and Mg will be unavailable until the media pH equalizes so the plant can assimilate the residual elements. Large pieces of lime really extend the duration of the reactive phase.

Q. Does this mean that I need to make up the soil in advance? Yes. 2 weeks or so should be enough time to allow for the reaction phase to be complete & residual Ca/Mg to become more readily available from the outset .

Q. During those 2 weeks, do I need to keep turning it and moistening it? No

Q. Can I go ahead and fill my 3-gal. containers, stack them 3-high, and cover the top one to prevent moisture loss during the waiting period? Something like that would be preferred.

Q. The perlite I use has a large amount of powder even though it is called coarse. Do I need to sift it to get rid of the powder? Not unless it REALLY has a lot - then, the reason wouldn't be because of issues with particle size - it would be because you had to use larger volumes to achieve adequate drainage & larger volumes bring with it the possibility of Fl toxicity for some plants that are fluoride intolerant.

Q. What about earthworm castings (EWC)? I think 10% is a good rule of thumb for the total volume of fine particles. I try to limit peat use to about 10-15% of soil volume & just stay away from those things that rob aeration & promote water retention beyond a minimal perched water table. If you start adding 10% play sand, 10% worm castings, 10% compost, 10% peat, 10% topsoil, 10% vermiculite to a soil, before long you'll be growing in something close to a pudding-like consistency.

Q. Do you drench the mix with fertilized water before putting in containers? No - especially if you incorporate a CRF. It will have lots of fertilizer on it's surface & the soil could already be high in solubles. If you added CRF, wait until you've watered and flushed the soil a couple of times. If you didn't use CRF, you can fertilize with a weak solution the first time you water after the initial planting irrigation.

Q. How much of the micronutrients should I add if I am going to be fertilizing with Foliage Pro 9-3-6, which has all the micronutrients in it? You won't need any additional supplementation as long as you lime.
Q. Just to make sure I understand, are you saying I don't need to use Foliage Pro 9-3-6 until after the initial watering right after planting even if I don't use a CRF? And no additional micronutrients? That's right - on both counts.

Q. Do I need to moisten the peat moss before mixing with the pine bark fines? It helps, yes.

Selections from Notes on Choosing a Fertilizer

A) Plant nutrients are dissolved in water
B) The lower the nutrient concentration, the easier it is for the plant to absorb water and the nutrients dissolved in the water - distilled water is easier for plants to absorb than tap water because there is nothing dissolved in distilled water
C) The higher the nutrient content, the more difficult it is for plants to absorb water and the nutrients dissolved in water
D) To maximize plant vitality, we should supply adequate amounts of all the essential nutrients w/o using concentrations so high that they impede water and nutrient uptake.

All that is in the "Fertilizer Thread" I posted a while back.

Q. Do you use the Dyna-Gro Foliage Pro 9-3-6 exclusively throughout the life of the plant, or change to something else for the flowering/fruiting stage? I use lots of different fertilizers, but if I had to choose only one, it would likely be the FP 9-3-6. It really simplifies things. There are very few plants that won't respond very favorably to this fertilizer. I use fast soils that drain freely & I fertilize at EVERY watering, and it works extremely well.

If you are using a soil that allows you to water freely at every watering, you cannot go wrong by watering weakly weekly, and you can water at 1/8 the recommended dose at every watering if you wish with chemical fertilizers.

Q. What about the "Bloom Booster" fertilizers? To induce more prolific flowering, a reduced N supply will have more and better effect than the high P bloom formulas. When N is reduced, it slows vegetative growth without reducing photosynthesis. Since vegetative growth is limited by a lack of N, and the photosynthetic machinery continues to turn out food, it leaves an expendable surplus for the plant to spend on flowers and fruit. There are no plants I know of that use anywhere near the amount of P as they do N (1/6 is the norm). It makes no sense to me to have more P available than N unless you are targeting a VERY specific growth pattern; and then the P would still be applied in a reasonable ratio to K.

Somewhere along the way, we curiously began to look at fertilizers as miraculous assemblages of growth drugs, and started interpreting the restorative effect (to normal growth) fertilizers have as stimulation beyond what a normal growth rate would be if all nutrients were adequately present in soils. It�s no small wonder that we come away with the idea that there are �miracle concoctions� out there and often end up placing more hope than is reasonable in them.

What I'm pointing out is that fertilizers really should not be looked at as something that will make your plant grow abnormally well - beyond its genetic potential . . . Fertilizers do not/can not stimulate super growth, nor are they designed to. All they can do is correct nutritional deficiencies so plants can grow normally.

Q. Should I use organic ferts or chemical ferts in containers? Organic fertilizers do work to varying degrees in containers, but I would have to say that delivery of the nutrients can be very erratic and unreliable. The reason is that nutrient delivery depends on the organic molecules being broken down in the gut of micro-organisms, and micro-organism populations are boom/bust, varying widely in container culture.

Some of the things affecting the populations are container soil pH, moisture levels, nutrient levels, soil composition, compaction/aeration levels ..... Of particular importance is soil temperatures. When container temperatures rise too high, microbial populations diminish. Temps much under 55* will slow soil biotic activity substantially, reducing or halting delivery of nutrients.

I do include various formulations of fish emulsion in my nutrient program at certain times of the year, but I never rely on them, choosing chemical fertilizers instead. Chemical fertilizers are always immediately available for plant uptake & the results of your applications are much easier to quantify.

Q. Should I feed the plants every time I water? In a word, yes. I want to keep this simple, so I�ll just say that the best water absorption occurs when the level of solutes in soil water is lowest, and in the presence of good amounts of oxygen. Our job, because you will not find a sufficient supply of nutrients in a container soil, is to provide a solution of dissolved nutrients that affords the plant a supply in the adequate to luxury range, yet still makes it easy for the plant to take up enough water to be well-hydrated and free of drought stress. All we need to do is supply nutrients in approximately the same ratio as plants use them, and in adequate amounts to keep them in the adequate to luxury range at all times. Remember that we can maximize water uptake by keeping the concentrations of solutes low, so a continual supply of a weak solution is best. Nutrients don�t just suddenly appear in large quantities in nature, so the low and continual dose method most closely mimics the nutritional supply Mother Nature offers. If you decide to adopt a "fertilize every time you water" approach, most liquid fertilizers can be applied at � to 1 tsp per gallon for best results.

The system is rather self regulating if fertilizer is applied in low concentrations each time you water, even with houseplants in winter. As the plant�s growth slows, so does its need for both water and nutrients. Larger plants and plants that are growing robustly will need more water and nutrients, so linking nutrient supply to the water supply is a win/win situation all around.

You can tell you've watered too much (or too little - the response is the same - a drought response) when leaves start to turn yellow or you begin to see nutritional deficiencies created by poor root metabolism (usually N and Ca are first evident). You can prevent overwatering by A) testing the soil deep in the container with a wood dowel ... wet & cool - do not water, dry - water. B) feeling the wick & only watering when it's dry C) feel the soil at the drain hole & only water when it feels dry there.

Soils feel dry to our touch when they still have 40-45% moisture content. Plants, however, can still extract water from soils until they dry down to about 25-30%, so there is still around a 15% cush in that plants can still absorb considerable moisture after soils first feel dry to us.

Q. When you water/fertilize, do you give it enough that 10% leaches out the bottom each time? Yes, I try to do that at every watering. Remember that as salts accumulate, both water and nutrient uptake is made more difficult and finally impaired or made impossible in severe cases. Your soils should always allow you to water so that at least 10-15% of the total volume of water applied passes through the soil and out the drain hole to be discarded. This flushes the soil and carries accumulating solutes out the drain hole. In addition, each thorough watering forces stale gases from the soil. CO2 accumulation in heavy soils is very detrimental to root health, but you usually can't apply water in volume enough to force these gases from the soil. Open soils allow free gas exchange at all times.

Q. Should I elevate my pots? The container will not drain the same % of water if it's sitting in a puddle, but the % won't be particularly significant. What will be significant is: if water (in a puddle) is able to make contact with the soil in the container through surface tension and/or capillarity, it will "feed" and prolong the saturated conditions of any PWT that might be in the container. However, if water can soak in or if it will flow away from the containers, there's no advantage to elevating when you're not using a wick.

Q. I like a pH of about 5.7. Is that about right? That's a good number, but you won't have any way of maintaining it in your soil w/o some sophisticated equipment. I never concern myself with media pH. That doesn't mean you should ignore water pH, though. It (water pH) affects the solubility of fertilizers; and generally speaking, the higher the water pH, the lower the degree of nutrient solubility.

Q. How do you repot? Some plants do not take to root-pruning well (palms, eg), but the vast majority of them REALLY appreciate the rejuvenational properties of major root work. I'm not at all delicate in my treatment of rootage when it comes time to repot (completely different from potting-up). Usually I chop or saw the bottom 1/2-2/3 of the root mass off, bare-root the plant, stick it back in the same pot with ALL fresh soil, use a chopstick to move soil into all the spaces/pockets between roots, water/fertilize well & put in the shade for a week to recover. I should mention that this procedure is most effective on plants with woody roots, which most quickly grow to be inefficient as they lignify, thicken, and fill the pot. Those plants with extremely fibrous root systems are easier to care for. For those, I usually saw off the bottom 1/2 - 2/3 of the roots, work a chopstick through the remaining mat of roots, removing a fair amount of soil, prune around the perimeter & repot in fresh, well-aerated soil.

I find that time after time, plants treated in this fashion sulk for a week or two and then put on a huge growth spurt (when repotted in spring or summer). Growth INVARIABLY surpasses what it would have been if the plant was allowed to languish in it's old, root-bound haunts. Potting up is a temporary way to rejuvenate a plant, but if you look ate a long-term graph of plants continually potted-up, you will see continual decline with little spurts of improved vitality at potting-up time. This stress/strain on plants that are potted-up only, eventually takes its toll & plants succumb. There is no reason most houseplants shouldn't live for years and years, yet we often content ourselves with the 'revolving door replacement' of our plants when just a little attention to detail would allow us to call the same plant our friend - often for the rest of our lives if we prefer.

Q. Is there any rule of thumb as to how often to root prune? I'm going to answer as if you included 'repotting' in your question. There is no hard, fast rule here. Some of you grow plants strictly for the blooms, and some plants produce more abundant blooms in containers when they are stressed in some manner. Often, that stress is in the form of keeping them root-bound. I'll talk about maintaining a plant's vitality & let you work out how you want to handle the degree of stress you wish to subject them to, in order to achieve your goals. Before I go on, I'd like to say that I use stress techniques too, to achieve a compact, full plant, and to slow growth of a particularly attractive plant - to KEEP it attractive. ;o) The stress of growing a plant tight can be useful to a degree, but at some point, there will be diminishing returns.

When you need to repot to correct declining vitality:

1) When the soil has collapsed/compacted, or was too water-retentive from the time you last potted-up or repotted. You can identify this condition by soil that remains wet for more than a few days, or by soil that won't take water well. If you water a plant and the soil just sits on top of the soil w/o soaking in, the soil has collapsed/compacted. There is one proviso though: you must be sure that the soil is wet before you assess this condition. Soils often become hydrophobic (water repellent) and difficult to rewet, especially when using liquid organic fertilizers like fish/seaweed emulsions. Make sure this effect is not what you're witnessing by saturating the soil thoroughly & then assessing how fast the water moves downward through the soil. The soils I grow in are extremely fast and water disappears into the mix as soon as it's applied. If it takes more than 30 seconds for a large volume of water to disappear from the surface of the soil, you are almost certainly compromising potential vitality.

I'll talk about the potential vitality for just a sec. Plants will grow best in a damp soil with NO perched water. That is NO saturated layer of water at the bottom of the pot. Roots begin to die a very short time after being subjected to anaerobic conditions. They regenerate again as soon as air returns to the soil. This cyclic death/regeneration of roots steals valuable energy from the plant that might well have been employed to increase o/a biomass, and/or produce flowers and fruit. This is the loss of potential vitality I refer to.

2) When the plant is growing under tight conditions and has stopped extending, it is under strain, which will eventually lead to its death. "Plants must grow to live. Any plant that is not growing is dying." Dr. Alex Shigo Unless there are nutritional issues, plants that have stopped extending and show no growth when they should be coming into a period of robust growth usually need repotting. You can usually confirm your suspicions/diagnosis by looking for rootage "crawling" over the soil surface and/or growing out of the drain hole, or by lifting the plant from its pot & examining the root mass for encircling roots - especially fat roots at the container's edge. You'll be much less apt to find these types of roots encircling inner container perimeter in well-aerated soils because the roots find the entire soil mass hospitable. Roots are opportunistic and will be found in great abundance at the outside edge of the soil mass in plantings with poor drainage & soggy soil conditions - they're there looking for air.

3) When the soil is so compacted & water retentive that you must water in sips and cannot fully flush the soil at each watering for fear of creating conditions that will cause root rot. This isn't to say you MUST flush the soil at every watering, but the soil should drain well enough to ALLOW you to water this way whenever you prefer. This type of soil offers you the most protection against over-watering and you would really have to work hard at over-fertilizing in this type of soil. It will allow you to fertilize with a weak solution at every watering - even in winter if you prefer.

Incidentally, I reject the frequent anecdotal evidence that keeping N in soils at adequacy levels throughout the winter "forces" growth or "forces weak growth". Plants take what they need and leave the rest. While there could easily be the toxicity issues associated with too much fertilizer in soils due to a combination of inappropriate watering practices, inappropriate fertilizing practices, and an inappropriate soil, it's neither N toxicity NOR the presence of adequate N in soils that causes weak growth, it's low light levels.

Q. Is there any rule of thumb as to how often to remove and replace the old soil? Yes - every time you repot.

As always, I hope that those who read what I say about soils will ultimately take with them the idea that the soil is the foundation of every container planting & has effects that reach far beyond the obvious, but there is a snatch of lyrics from an old 70's song that might be appropriate: "... just take what you need and leave the rest ..." ;o)

NOTES:

<none>
clipped on: 01.19.2014 at 08:24 pm    last updated on: 01.19.2014 at 08:24 pm